VEINING
After you have baked on the foundation you can apply veining. I have found it’s also ok to apply veining as the first step, on the bare vinyl. It doesn’t matter much which way you do it. If you tend to be heavy-handed with your color, veining first and covering most of it up with subsequent layers of color will probably work best for you.
I start with Phthalo Green 06 and Phthalo Blue 03 (or 2)
Dampen your 0 Round brush with quite a lot of thinner and mix up a light teal or turquoise color using the green & blue.
Make sure the color is transparent and somewhat wet
Apply the paint in just a couple lines at a time, and then quickly use your sponge to blend it in
A few up under the jawbone…
And then the limbs:
(the back of the leg up the thigh)
Once you have all your veining completed, you should bake.
REMEMBER: 265*F or 140*C for about 8 minutes give or take 2-3 minutes depending on your oven